I hope this post helps at least one more person. No worries! It was very easy to fix, irony is I needed the new part to see how the timing was off on the old part. Vmax wrote:Thanks for the great info and pics S Squirrel Prefer warranty if you have one, over here warranty works for crap so fixing these or atleast trying to fix them is less of a headache.
If the action levers are timed wrong from the factory then it wont help.Īnyone doing this should be really careful, i have no idea how well the metal parts handle being forcefully twisted to another position. If the gun is letting multiple shells in you would have to do the opposite if the problem is on that part.
I used pliers to make the profile of that small notch on the top of that rail a bit steeper to make it disengage more aggressively + moving the tip on the end that stops the shells closer to the edge so it doesnt need to be moved as much to let the shells pass. You had the opposite problem, it was disengaged all the time letting all the shells through causing double feeds. The rail on right side of the trigger unit that prevents more than 1 round coming from the tube at once wasnt disengaging enough to let shells pass. Well it seems i was on the right track, ill try to explain how i fixed it. When this happens, the firing pin does not extrude from the bolt head as much because there is more distance for it to travel, resulting in a mis-fire. This is because when the forend is pulled back towards the shooter, the bolt carrier pulls away from the bolt head. But if you pull the forend towards you, the gun will mis-fire. When the forend is pushed forward, towards the muzzle, the gun will fire every time. When a round is loaded into the chamber, there is some play in the forend you can jiggle it back and forth about ⅛”. Problem 2: The gun will also mis-fire (light-strikes). I'm thinking a solution would be to dremel down the chamber where the round is hitting. What happens is the round does not get seated in the carrier properly and the side of the round hits the side of the chamber as it's being loaded. Problem 1: The gun jams, probably once in about 20-30 rounds. I have cleaned it twice, once after the first outing and again after two more outings. I've taken it out four times and put about 100-200 2-3/4 birdshot shells through it each time.
0 kommentar(er)
